Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
This item does not fit your vehicle
2010 Ford Explorer
These items fit your vehicle
2010 Ford Explorer
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
The Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector draws power directly from the vehicle battery, not from the tail light circuits. That means the trailer lights get full, consistent power without putting extra load on your vehicle’s wiring. It’s a dependable way to keep your running lights, turn signals, and brake lights bright and trouble-free every time you tow.
Modern vehicles use different wiring styles like Pulse Width Modulation or multiplex systems. This converter is built to handle those signals correctly and translate them for standard trailer lighting. Whether you’re connecting to LEDs or traditional bulbs, it sends the right signal every time so everything works together as it should.
This harness is a universal splice-in setup that works on a wide range of vehicles. You simply connect the color-coded wires—yellow for left turn, green for right turn, red for brake, and brown for tail—to your corresponding light circuits. The included ground and power leads complete the system for a solid electrical connection.
By using its own fused power line straight to the battery, the harness isolates trailer load from sensitive vehicle electronics. That prevents voltage spikes or drain on the factory lighting circuits. It’s a simple but smart safeguard that keeps both your vehicle and trailer wiring safe from overloads or faults.
The 4-pole flat connector provides the basic trailer functions—running lights, brake lights, and turn signals—with one easy plug. Once installed, you can hook up most small trailers or hitch-mounted accessories with lights just by plugging in and going.
Customer Satisfaction Score:
85% were satisfied with this product
15% of customers were not satisfied
Ratings & Reviews
As with everything I have ordered from etrailer it cal when expected. Still need to get the hitch and harness installed.
There is another wiring harness from Curt (55336) that other users report connects directly into the Honda Element wiring harness without all the splicing. I hate splicing. I hate cutting OEM wiring. This comes from experience with vehicles that had shorts thanks to all that nonsense.I was expecting a T or something with a plug but not a bunch of crimped splicing into the wiring.
Unfortunately you stopped carrying th full trailer hitch install kit I need. The tail light kit was affordable and shipped fast. Kyle helped me find a parts list for the install kit and I've been acquiring the pieces elsewhere. I think I've found all the parts and should be able to proceed. Thanks Kyle! Someone should organize the install kit part list into a package so e-trailer could provide them.
This was the second hitch from etrailer I have installed. Good materials make a good hitch, these are top quality. In the past I have built my own hitches so I am familiar with installation. Installation suggested time is underestimated.
Would I buy again? Definitely yes.
Cable for the right turn single isn’t long enough, so you will need some extra wire and another butt connector. Turn single wiring was 18/20awg in my vehicle, so note that when selecting the size wire to extend and the crimp to use.
Box was a little beat up, but the receiver hitch came through ok. Easy install! This is the third hitch I have bought from Etrailer. All were excellent and easy to install. Thanks Etrailer!
The instruction sheet that comes with the wire harness for me was little help when installing. What really helped me was the e-trailer video on the installation on a 2026 Equinox. The video showed me step by step what to do to install the harness kit completely and the correct color-coded wires to attach together. It left no questions unanswered! Thank You! Gary
Kit is good but adapting it to my vehicle is lacking info as the new blazer wiring diagrams are not available and having led tail lights the lights have internal flasher in each light. Waiting for more info from gm as they have no trailer wiring info for now.
I’m giving this a 2 star because I suppose I am at fault as well, this converter is NOT for a 2019 Jeep compass it is simply a universal fit converter, so you have to splice it into your vehicle wiring… not what I thought I was buying. If you are buying a make and model specific hitch why would you not include the make model specific wiring harness as well. Guess I should have paid better attention, but honestly I was concerned more about the hitch at the time than the wiring so maybe it was an option I didn’t notice
Although not specificly mentioned, it worked fine for my vehicle, 2026 Lexus 350H. I would suggest installing it prior to the hitch install to make wire routing easier.
Have not had it installed yet. Some things have not arrived yet. No hitch with 2” Ball. No bolts with the trailer hitch.
Perfect fit for the hitch. Little effort to dissect the SUV to accommodate the bolts and torque wrench but I managed to do it myself. I'm only hauling bikes for now so haven't attempted to install the electrical components yet as I don't need to.
I exchanged this with the factory plug, my car had the manufactures plug in connector ready, so e trailers have this too so just exchange it with the plug in curt harness which is easier than cutting in etc..
Once properly installed, the wiring kit to connect the trailer lights to my vehicle did a fine job. Instructions were fairly clear, but some of the abbreviations were mystifying and undefined in the documentation. The least satisfactory part was the grossly oversized electrical connectors. The Ford EcoSport for which this kit was bought is equipped with extremely small gauge wires in the tail lights and two of the four connectors didn’t even pierce the insulation of the vehicle wiring. It was a quick fix once discovered, but mainly because this “wasn’t our first rodeo!”
Unfortunate etrailer does NOT carry an adaptable version for my truck. This universal kit was way too complicated trying to decipher which wires to splice into, especially since the truck had a pigtail already which just needed a proper fitting to connect it. I returned it and used a much easier/cheaper 4-wire version from Walmart.
I'll be vary care full about buying anything from etrailer in the future. I bought a $[XX] wiring kit that was advertised as fitting my van, but it didn't. then a $[XX] kit and was refunded $[XX] for the first kit. That's $[XX] for a wiring kit. I should have just gone to a local parts store. Live and learn.
The converter itself is fine but annoyed that Curt could not have made the driver's side wires long enough to reach the taillight. Not the end of the world to have to add custom extensions, just wouldn't have to be done if 2 more feet was added to those leads.
The video for installing in a 2023 telluride worked well for a 2027 telluride. The power wire was barely long enough. I installed planning to cut off both ends and only cut from one. It’s a challenging job with floor jacks instead of a lift but it’s doable if you have enough time.
The video on e-Trailer was for a car very similar to mine and really made the installation possible. I was VERY nervous about cutting into the standard wire harness in light of the super fine wires used in the car (Lexus RX 450h+). The video suggested using weatherproof but connectors so that is what I used and everything works as advertised. Would I use this kit again? ONLY if a "plug and play" -like I had on my Subaru could not be found. A word of caution: the Lexus vehicles will totally lock up if the 12v battery drains completely. Yes, the RX450 does have a 12v battery in addition to the main electric battery. If this happens even the manual key from the key fob will not open the door. Per Lexus, this is considered a safety feature.
Product works perfectly. Installation video was accurate and easy to follow. Took about a hour to connect all the wires. Connecting the power wire to the fuse compartment was bit tricky as couldn’t get the mat out to pass the wire underneath. Since Acura MDX trailer connector is empty for the company fitted towing system. It would be nice to have an optional connector to just connect all 4 wires to and plug the system without cutting the existing wires.
Went on like you would expect. I ordered the plug bracket (reason for the rubber band holding the plug temporarily)rather than have the wires in the back hanging out through the hatch door. I ran them out where the rear light assembly is. The cutout measurement was a bit off. Corrected, no worries
I've installed several model-specific hitches from etrailer.com and they were all easy but this was the easiest yet.
Excellent kit that was easy to install. etrailer's video on YouTube was great! Discovered that my muffler heat shield had corroded fasteners, so I found a repair kit on Amazon with oversized “washers” that are good so far.
Do not attempt to to DYI this converter install unless you are very, very experienced!!
Me, a retired Master Auto/Tech-Electrician took 3-4 hours to do a safe installation. My 2003 Camry's rear wiring is too small to safely carry the amperage that would be needed for a CURT all-plug-in kit.
The long term safe part of the install is fishing routing the black power wire all of the way inside past the C, then B , then A pillars and tie up looping over the steering column and brake pedal assembly. The easy way under-chassis routing along steel brake lines is not long term safe. Dependent then on many many (more than supplied) ny-wraps to keep from hanging down sagging road debris snagged.
Steveu.
7/21/2026
Great so far. The electronic converter box has proven to be durable. Note: my vehicle is actually a 2003 Toyota Camry.
Lazer S.
7/21/2026
This was delivered within same box as a trailer hitch that I ordered for my 2017 QX50. Wir8ng package was open/damaged, however item looked clean and new. I installed it a couple days ago following instructions video since it was not a plug&play application. The installation took about 30 minutes. The unit works flawlessly. I towed my small trailer using the wiring and I had no issue what so ever. Iam happy with the purchase.
Brooke M.
4/23/2025
That's great to hear, Burak! I'm impressed with your install time. Do you work with cars a lot?
Burak A.
4/7/2026
The wiring still works without any issues after a year. I have used it total of 10-15 times with my small trailer.
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mike L.
6/30/2026
Great job Jill, I'm glad to hear the video helped!